How to Pack a Parcel for Shipping
Find practical guidance on boxes, cushioning, tape and labels for your UPS parcel. Follow the tips below or view the UPS packaging guide for detailed packing methods.
Packaging Tips
Follow these six tips to prepare your parcel for shipping.
- Choose the Right Box
Use a rigid box with flaps attached and do not exceed the weight limit printed on its bottom flap. See our parcel dimensions and weight guide for UPS size and weight limits.
- Pick the Right Packaging Materials
Use the appropriate cushioning material to protect internal items. Seal and place bottles and containers in plastic or spill-proof bags. Order UPS packaging supplies.
- Only Use Shipping Tape
Use shipping tape — not masking, cellophane, duct or water-activated paper tape, string or paper over-wrap. Seal the centre and edge seams in an H pattern on the top and bottom of the box. See the UPS packaging guide.
- Remove or Conceal Any Old Labels
If any labels, hazardous materials indicators or other previous shipment markings are on the box ensure they are removed or covered.
- Secure Your UPS Shipping Label
Securely attach a UPS-issued paper shipping document or label generated through an approved UPS automated shipping system. Place it on the largest top surface of the box, clear of seams, edges, closures and sealing tape. Keep it fully visible, with no tape, other labels or paperwork covering it.
- Add a Duplicate Address Label Inside
Place a duplicate address label inside the box that displays clear, complete delivery and return information.
Packaging Materials to Protect Your Items
Void fill occupies empty spaces around packed items to help limit movement inside the box. Choose materials based on the item’s weight, fragility and sharp edges, using the suitability notes below. For fragile goods, see the two-box method.
- Expanded Polystyrene Foam (EPS or Packing Peanuts)
Use no less than two inches (five centimetres) of loose filler material around lightweight items for cushioning around contents. It’s not ideal for flat, narrow products that may move in transit.
Note: EPS causes static electricity that may damage electronic items. Use anti-static foam for electronic items, along with bubble sheeting around the item. - Air-Encapsulated Plastic (Bubble Wrap)
Use to protect and cushion lightweight items by applying multiple wraps and layers to ensure that the item is completely protected, especially on corners and edges.
Note: Place the flat side of the bubble wrap against the item, with the bubbles facing outward. - Inflatable Packaging (Air Bags)
Use as void-fill material for lightweight items without sharp corners or edges.
Note: Extreme hot or cold temperatures may affect the ability of air bags to provide adequate product protection. - Crumpled Kraft Paper
Ideal as void-fill material for lightweight, non-fragile items but must be tightly crumpled. Place at least two inches (five centimetres) of paper between contents and outer box. - Corrugated Liners and Inserts
May be added to the parcel to increase box strength.
FAQ
The one-box method is recommended for pre-packaged, soft, durable, easily soiled, or tiny, granular goods.
The two-box method is recommended for sharp or fragile goods, bags and accessories, travel and luxury items. The two-box method places a securely packed inner box inside a larger outer box with cushioning between them. This is different from taping separate parcels together. For guidance on bundling separate boxes, see page 24 for the bundled or strapped boxes section of the UPS packaging guide.
How to use the two-box packaging method:
- Step 1: Choose your box.
- Step 2: Fill empty spaces within the box with any of the following filler materials to limit movement during shipping: cell bubble sheeting, loose-fill peanuts, kraft paper, and other similar material.
- Step 3: For the outer box, use a box that has a depth, width, and length six inches (15 centimetres) greater than the inner box.
- Step 4: Secure your box with an additional three inches (7.6 centimetres) of cushioning material around the inner box to fill the spaces between the inner box and outer box.
- Step 5: Fill the box with more filler material of your choice to cover any remaining empty spaces.
- Step 6: Tape closures and seams to seal your parcel.