You can use Laser 8½" x 11" or Laser 8½" x 11" (2 Labels per Page) (or local equivalent) stock to print shipment labels with an extended area. The extended area (2 inches or local equivalent at either the top or the bottom) allows you to customize your labels with a shipment label header, generic barcode, or reference numbers.
To set up the laser label printer to print Laser 8½" x 11" or Laser 8½" x 11" (2 Labels per Page) (or local equivalent) labels with an extended area:
On the Tools tab, select System Preferences and then Printing Setup. The Printing Setup tab in the System Preferences Editor window appears.
Select the printer in the Printer grid for which you want to setup labels.
Tip: If your printer is not shown in the Printer grid, see Install a Label Printer.
Click the Label Printer Setup button. The Label Printer Setup window appears.
If the correct printer appears in the Name box, skip to step 8. If the correct printer does not appear in the Name box, continue with step 6.
Under Printer, click the Change Label Printer button. The Printer Selection window appears.
Select your laser label printer and click the Select button. The Label Printer Setup window appears again.
Under Label Configuration, click the down arrow in the Label Stock Dimensions box and select Laser 8½ x 11 or Laser 8½ x 11 (2 Labels per Page) (or local equivalent).
Click the down arrow in the Extended Area Usage box and select what you want to print in the extended area of the label. Your choices are (None), Shipment Label Header, Reference Numbers, and Generic Barcode.
Tip: If you select reference numbers to print in the extended area and then select the same reference numbers to print as part of the label information, those reference numbers will not print in the extended area.
Click the Apply button. The Printing Setup tab in the System Preferences Editor window appears again.
In the Printer grid, verify that the Printer Name shows your printer; Label Stock Dimensions shows Laser 8½ x 11 or Laser 8½ x 11 (2 Labels per Page) (or local equivalent); and Extended Area Usage shows (None), Shipment Label Header, Reference Numbers, or Generic Barcode.
Select other label options specific to this label as needed:
Select the Default Printer check box if this printer is the default for this printer type. One default printer is allowed for each printer type.
If you selected Generic Barcode for the extended area in step 9, click the down arrow in the This Reference Number is Assigned to the Selected Barcode box and select the reference number to be encoded in the barcode.
Tip: You must enter the actual barcode for this option in the corresponding Reference Number box on the Reference tab in the Shipping window.
Select the appropriate consignee label check boxes. If you select the Print Freight Consignee Label check box, select either Per Handling Unit or Per Piece.
Click the Update button.
See Set Printing Setup System Preferences for instructions on other system preferences not specific to this particular label.