You can use Laser 8½" x 11" (4 Labels per Page) stock to print standard labels. This label stock does not have an extended area, but you can print two reference numbers on the label.
To set up the laser label printer to print Laser 8½" x 11" (4 Labels per Page) labels:
On the Tools menu, click System Preferences. The System Preferences Editor window appears.
On the Printing Setup tab, click the Label Printer Setup button. The Label Printer Setup window appears.
Under Printer, click the Change Label Printer button. The Printer Selection window appears.
Select your laser label printer and click the Select button. The Label Printer Setup window appears again.
Under Label Configuration:
Click the down arrow in the Label Stock Dimensions box and select Laser 8½ x 11 (4 Labels per Page).
Click the Apply button. The Printing Setup tab in the System Preferences Editor window appears again.
On the Printing Setup tab:
Under Current Label Configuration, verify that Label Printer shows your printer, Label Stock Dimensions shows Laser 8½ x 11 (4 Labels per Page), and Extended Area Usage shows (None).
Click the down arrow in each This Reference No. Prints on the Label box and select a reference number to appear on the label.
Click the Print Test Label button to make sure your printer is correctly set up for UPS WorldShip. If the label does not print correctly, recheck your configuration.
Tip: The reference numbers will not print on the test label; however, the reference numbers will print on a real label.