To set up the dump mode process for the ZP-450 printer, follow the steps
below:
- Turn off the printer.
- While holding the feed button, turn on the printer. The indicator light will
turn solid orange, followed by a rapidly blinking red, then back to solid
orange.
- Continue holding the feed button until the indicator light turns green, then
release the feed button.
- The printer will eject one or more labels before printing the following
message:
- Now in DUMP
- Press Feed to exit
- or send ~JE
- Press the feed button again. A single Out of DUMP label will
print.
Get step-by-step directions on reseting a printer by selecting the link
below. |