The table below lists the known packagings that can be used to package specific hazardous materials that UPS requires to be in DOT exemption/Special Permit packaging. You may find other acceptable exemption packages offered by your hazardous materials packaging professional. Be sure that the packagings you purchase are approved by the DOT and are covered under a current exemption.
|
 |
|
|
|
|
|
|
Exemption Number |
|
Applicable UPS Modes |
|
Classes/Divisions* |
|
Manufacturer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOT-SP-8249 |
|
Ground or passenger aircraft |
|
Division 4.1, 4.3, 5.1**, 5.2**, 6.1
Class 3, 8, or 9 |
|
LPS Industries
1-800-275-6577 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOT-SP-9168 |
|
Ground or passenger aircraft |
|
Division 4.1, 4.3, 5.1**, 5.2**, 6.1
Class 3, 8, or 9 |
|
All-Pak, Inc.
1-800-245-2283 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOT-SP-10672 |
|
Ground or passenger aircraft |
|
Division 4.1, 4.3, 5.1**, 5.2**, 6.1
Class 3, 8, or 9 |
|
Burlington Packaging
1-800-797-4118 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOT-SP-10962 |
|
Ground or passenger aircraft |
|
Division 4.1, 4.3, 5.1**, 5.2**, 6.1
Class 3, 8 or 9 |
|
International Compliance Center
1-716-283-0002 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOT-SP-10977 |
|
Ground or passenger aircraft |
|
Division 4.1, 4.3, 5.1**, 5.2**, 6.1
Class 3, 8 or 9 |
|
Federal Industries Corp.
(612) 476-1500 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOT-SP-11248 |
|
Ground or passenger aircraft |
|
Division 4.1, 4.3, 5.1**, 5.2**, 6.1
Class 3, 8 or 9 |
|
HazMatPac, Inc.
1-800-923-9123 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOT-SP-13355 |
|
Ground or passenger aircraft |
|
Division 4.1, 4.3, 5.1**, 5.2**, 6.1
Class 3, 8, or 9 |
|
HAZPlus
1-866-596-6786 |
|
|
|
|
|
|
|
|
|
|
*Division 6.1 packages must be prepared without hazard labels.
**Division 5.1 and 5.2 materials are accepted in Ground Service only.
You must use the exemption/special permit package corresponding to the class of hazardous material authorized by the exemption/special permit. The manufacturer´s instructions for assembly must be followed completely. This includes using only components that are specifically designed as part of the exemption packaging system.
The package must be stamped by the manufacturer with "DOT-E" or "DOT - SP" followed by the exemption number on the side of the carton. The "DOT-E" or DOT - SP" number must also appear on the UPS Shipping Paper and the Shipper´s Certification indicating that the exemption/special permit applies to this specific shipment of hazardous material.
Finally, UPS requires that a copy of the written DOT exemption/special permit be placed on the package in a resealable pouch.
If "yes" appears in the "Ground Shipments - DOT Exemption/Special Permit or 173.13" or the "Air Shipments - DOT Exemption/Special Permit or 173.13" columns the package must conform to the applicable DOT Exemption/Special Permit or 173.13.
If you have any questions about shipping hazardous materials with UPS, please call the UPS Hazardous Materials Support Center 1-800-554-9964.
|
|
|
|
|
